Dsinned
Well-known member
Miimura, which is more cost favorable from your perspective for PG&E's solar customer who are over generating, E-6 or E-7 (assuming the latter is somehow still open to new enrollments)?
If you are "over-generating" it doesn't really matter. Either one will get you to $0 well before net zero energy. After that it's all the same since PG&E will pay you a flat amount per kWh that you are a net generator.Dsinned said:Miimura, which is more cost favorable from your perspective for PG&E's solar customer who are over generating, E-6 or E-7 (assuming the latter is somehow still open to new enrollments)?
miimura said:If you are "over-generating" it doesn't really matter. Either one will get you to $0 well before net zero energy. After that it's all the same since PG&E will pay you a flat amount per kWh that you are a net generator.Dsinned said:Miimura, which is more cost favorable from your perspective for PG&E's solar customer who are over generating, E-6 or E-7 (assuming the latter is somehow still open to new enrollments)?
I agree, one rate or the other will get you to $0 "faster" if you are using more than you are producing. My point is that if you are all the way down to Zero kWh, it doesn't matter because both of them would have got you to $0 a long time before that. Everything between $0 billable and Zero kWh is a gift to the utility, whether you are on PG&E or SDG&E. Only negative kWh (net kWh export) gets you a check from the utility.dstjohn99 said:miimura said:If you are "over-generating" it doesn't really matter. Either one will get you to $0 well before net zero energy. After that it's all the same since PG&E will pay you a flat amount per kWh that you are a net generator.Dsinned said:Miimura, which is more cost favorable from your perspective for PG&E's solar customer who are over generating, E-6 or E-7 (assuming the latter is somehow still open to new enrollments)?
I'm with SDGE so my experience is not a direct comparison. But I did find that based on your individual energy usage profile (kWh, time of day) that the different time periods and rates between different schedules will affect which schedule gets you to "zero" faster (or provides more credits) thus making more kWs available for free car charging. I'm still on a slightly less favorable rate schedule than my analysis shows, but since I am not yet using 100% of my excess by charging the car I'm not too worried about it - only keeping a close watch. Obviously with excess production paid at ~.04/kWh I prefer to use it, but I have'nt been through the winter yet where my production is significantly reduced. I hope at the end of year true up that I will still be at or below zero for a zero energy bill or small rebate check.
Also, with SDGE I can switch rates with this trial, then switch back at any time. But if I call up and tell them "switch me to rate 'A'" then I am stuck with that rate for a one year minimum. So I wanna see how things play out with the trial before I request any non-trial related rate changes.
Cheers.
Is this just because of your plan? Or does this affect all of us?Dsinned said:To best of my knowledge, I'm still in the queue for a sub-metering JB, but due to complications with PG&E, looks like I won't get into the trial until sometime next year (if at all).
Glad to hear that, John! We do what we can to keep the pilot on a trajectory leading to eventual success, despite the slow roll-out and some other issues. As already mentioned, more established MDMAs have dropped out of the PEV pilot one by one, and Electric Motor Werks and Ohmconnect have been picking up the slack. Both are fairly young ventures, which might explain some wrinkles you have experienced. We monitor this venue and several others, but are unable to do so on a very frequent basis. Please feel free to reach out us through email ([email protected] and [email protected]). I have copied a post from Matt Duesterberg and Curt Tongue from Ohmconnect below. Please let them know directly if you continued to have problems. They will take care of you.dstjohn99 said:I got my first $150 rebate from EMW via Paypal a couple of days ago. That was kinda cool. Unfortunately, my Ohmconnect account has disappeared and I can get a reply from anyone there to see what's up. I hope I still have all my points and historical data if I can get back in someday. Also my JB does not connect to wifi unless I unplug it, then plug it back in. But since the trial hasn't started yet maybe that doesn't matter yet. Hopefully things will get worked out over the next couple weeks.
Matt Duesterberg said:Sorry about the issues all! These should all be fixed now. And sorry about the late reply Have a great weekend!
Curt Tongue said:Hi Guys - we pushed an update to the website (http://www.ohmconnect.com) yesterday and it caused a temporary break on the application side. Sorry for the inconvenience!
Yes, Dennis. This is very true, and we regret that also. We are all interested in getting this pilot underway, and the other MDMAs are in a very similar situation. You are literally on the forefront of these developments.Dsinned said:Unfortunately, the sub-metering trial seems to have gotten off to a slow start.
Although Electric Motor Werks does not wish to provide any official tariff advice or information, I believe that your approach is correct. When in doubt, please verify your strategy and send any questions to PG&E directly. We can help identify a proper point of contact, if you had trouble reaching someone familiar with your situation there.Dsinned said:To best of my knowledge, I'm still in the queue for a sub-metering JB, but due to complications with PG&E, looks like I won't get into the trial until sometime next year (if at all). Apparently, I'm not in an eligible rate plan (yet) and this is the one thing about the trial I don't like. I've been in E-9A for ~2 years (for as long as I've owned an EV) and am currently grandfathered until this rate plan ends in March of 2015.
Early this week PG&E notified me of this plan's imminent demise by that time. I should be allowed to switch rate plans at the same time I enter the EV-B sub-metering trial, but instead I must arbitrarily change rate plans - to one less favorable - just to be eligible for the trial in the first place. This really makes no sense, because most EV owners in Northern CA interested in joining the sub-metering trial, are probably already in E-9A. We are just waiting for E-9A to end, because it is the most favorable plan we can have compared to any other available plan.
The PEV pilot has been in the works for over three years. While we wish that progress was faster, I think we will get there eventually. Thanks again for your patience. Good things should come to those that have been patiently waiting.Dsinned said:Anyway, it's good to hear some of you elsewhere in CA are getting started in the trial, albeit rather SLOWLY, after waiting patiently since late last Summer to receive a JB. :mrgreen:
So, can we get any kind of type of rough estimate for getting chargers? Weeks, Months, another year? How many are on the waiting list? How many in the first batch? How long for the second batch?emotorwerks said:The PEV pilot has been in the works for over three years. While we wish that progress was faster, I think we will get there eventually. Thanks again for your patience. Good things should come to those that have been patiently waiting.
Ferdie, I just instructed Ohmconnect to queue you up for the next available set of pilot JuiceBoxes. We tried to prioritize new EV owners, since they don't have alternative home charging arrangements. My apologies if we have missed our objective in your case. I will follow up with you separately about your Jesla rental.Ferdball said:So, can we get any kind of type of rough estimate for getting chargers? Weeks, Months, another year? How many are on the waiting list? How many in the first batch? How long for the second batch?emotorwerks said:The PEV pilot has been in the works for over three years. While we wish that progress was faster, I think we will get there eventually. Thanks again for your patience. Good things should come to those that have been patiently waiting.
The reason that I would like to know is because I'm paying $75 monthly for a charger. If this is going to take another 6 months, it would be better for me to buy one. I would like to stop wasting money based on your estimate.
Please elaborate on what specific rollout issue(s) did the CPUC impose on MDMAs, and what is the solution? Apparently it is some sort of companion device to be co-located with the sub-metering JB itself. But, what is it, what does it do, and how does it work?emotorwerks said:The PEV pilot is primarily a submetering test program, which comes with a number of requirements and strings attached. All MDMAs involved, not just Ohmconnect and Electric Motor Werks, had to contend with utility-specific aspects of metering and related regulation. As already mentioned, we have identified an acceptable solution for the current impasse this week, and are moving ahead with its implementation. This was the primary reason for the slow roll-out.
The enrollment period presently ends on February 28, 2015. All hardware must be in place by then. Although it's premature to talk about it, my best guess is that the deadline could be moved into the summer.
So, you're going to contact me with more details?emotorwerks said:Ferdie, I just instructed Ohmconnect to queue you up for the next available set of pilot JuiceBoxes. We tried to prioritize new EV owners, since they don't have alternative home charging arrangements. My apologies if we have missed our objective in your case. I will follow up with you separately about your Jesla rental.
Ferdball said:Also, which outlet should I have installed.
14-50, got it. Thanks.fromport said:I would go with the 14-50
Left corner bottom, "279"
That is the one you normally often find for RV's.
So if you decide to go on a trip, best odds are you will find those the most.
Plus you make/buy some conversion units for the other 2 plugs ;-)
We have decided to standardize on one primary cable type: a 6-foot cable with a 14-50P plug (also known as the "RV 50A plug"), having 3 AWG 6-8 wires for hot terminals ground (JuiceBox does NOT need neutral for normal operation). This way we maximize portability (6-foot cord) and power handling ability (50A plug). This also allows you to plug your JuiceBox straight into the RV hookups anywhere in the country - there are over 15,000 RV parks in the US. This is almost double the number of public Level 2 charging stations today...
Enter your email address to join: