Attention JdeMO customers:
We were recently alerted us to a potential problem using JdeMO with CHAdeMO charge stations that are capable of over 125 amps / 50kW. There is a new one that just opened south of San Francisco, California USA (linked below) that can exceed that value.
If your JdeMO equipment was installed or updated between 1 Jan 2016 and 31 Dec 2018, your JdeMO equipment may charge faster than 125 amps / 50kW on these new high powered CHAdeMO chargers. This issue does NOT affect units before that time.
Thankfully, there is an manual remedy for this. Merely hold the green button WHILE CHARGING for 1 to 2 seconds and then release the button (holding for 3 seconds or more will stop the charge).
This will put the charger in a “half power” mode. Ensure that half power mode does not exceed 125 amps / 50kW before walking away from the vehicle.
Any time that you are using an unfamiliar charger, ensure that it does not exceed 125 amps / 50kW.
Any time that your JdeMO equipment is plugged into a charger, ensure that it does not exceed 125 amps / 50kW.
If you are in doubt as to the actual power going into the JdeMO, stop the charge immediately.
DANGER : Exceeding 125 amps / 50kW could result in property damage, fire, injury or death.
We will offer a complementary software update at our facility sometime in 2019. The updated software will not be ready before that future date in 2019.
That free update is in addition to our free low voltage wiring harness update, which you can have changed out at our shop or exchange it via FedEx / UPS / US Postal Service shipping companies.
Here is the link to the first CHAdeMO charger in the USA over 125 amps / 50kW.
Prunedale Shopping Center http://api.plugshare.com/view/location/163319