I bought 3 encoders(revision C from china, the orignal is revision B) but still getting the speed sensor errors. Checked the wiring from the sensor to the inverter conector and it is ok.
The motor rotates normal but in a random time it stop rotating(before was every 15-30min now is 3 to 8 min) and shows the speed sensor issue, if i shutdown the car and put it in drive it works even with the error showing but again stop working in a few minutes. Also uploaded the gateway firmware trying to fix this.
I'll try to check with the osciloscope the encoder signals just to confirm that the old and new encoders are ok.
What do you think what could be? Any insight will be appreciated.
The motor rotates normal but in a random time it stop rotating(before was every 15-30min now is 3 to 8 min) and shows the speed sensor issue, if i shutdown the car and put it in drive it works even with the error showing but again stop working in a few minutes. Also uploaded the gateway firmware trying to fix this.
I'll try to check with the osciloscope the encoder signals just to confirm that the old and new encoders are ok.
What do you think what could be? Any insight will be appreciated.
