Search results

Just to confirm, there cheapest router here will work since it has MPLS capability? https://mikrotik.com/product/RB750r2

VIN: 3141 I was hoping to use one of my old routers. It is running and ready for routing table updates to link you to the RAV. I am not sure what a Mirotik router does that a standard Cisco or other router does not do.

alflash, I will have the parts I need to give you remote access to my RAV today. I need to solder the CAT5 cable to the ODB2 connector, configure my router, and schedule time with your team. I had filled out your online form a month or two back but did not get a reply. What is the best way to...

Ok, partial success and a really stupid trip up. I was checking the HV plug as everyone suggested and noticed that the one of the pins was bent. I checked the plug and something had dropped over the pin receptacle preventing the pin for connecting when installed. After carefully removing the...

Thank you. I am having trouble locating the Tesla Diagnostic software. Or are you saying that RAV4EV can communicate with Tesla's remote diagnostic system? I did pull the HV service plug and will double check that I in cleaning inserted and also check the plug's fuse. Thank you for the advice.

I did make sure to replace the interlock loop. I will check continuity between pin 3 & 9. Thank you for the suggestion. I tried not to disturb anything inside the on-board charger except removing the screws so I could take the shroud off to replace the two blow 50A fuses. I saw what I think...

I did pull the HV plug prior to doing any high voltage work on the car. I will check the plug fuse and let you know if I find anything. Thank you for the info.

I removed the on-board charger to replace the two 50A fuses. After reassembly, I am getting a "Cntctr State" error message. Could it be that one or both charging contactor switches failed as well and that is why the fuses blew? Or could it be a kill switch that did not get reassembled correctly...