Search results

JQX-62F 2C 80A 250V AC High Power Relay Amazon $27.71 x1 http://www.amazon.com/Coil-28VDC-Power- ... ds=JQX-62F You want a 12V coil or if you are going for 240V only, a 240Vac coil or simpler, a 12V coil. The Qianji relay comes in many coil voltages. Fuses are not really something you want to...

An EVSE is considered a continuous load. You would need a 50A breaker for a 40A EVSE (80% 0f 50A). A 40A for a 30A EVSE. A 20A for a 16A EVSE, etc.

Taking over a Nissan lease is hard. If i was to have you take over my lease I WOULD REMAIN LIABLE for any missed payments. This makes it very unattractive for the original lease holder.

I just checked and the O on the label is really a D. The number is PRD250B-ND. I went back and got the source as well as the STL file from thingiverse. I can now print acceptable escutcheons instead of buying them.

The LCD escutcheon that I use from Digikey is a PRO250B-ND. It is the surround without a window. I usually use a cut piece of some window plastic I got from Home Depot to put underneath. I have also used an escutcheon that I printed out from thingiverse.com but it requires a much more precise...

I have no relays of any type on hand. The only one I have is the spare 240VAC one that having on hand frightens my EVSE into behaving. I usually see the China shipping times are overstated. That relay surfaced as the stock JuiceBox relay. You might see if they will sell you one.

The upgraded unit is no problem. It depends on what is used for displays. Most of the time for me at least is cutting the display holes. I do know how your mechanical skill set is but I would welcome your help. I wired an EVSE for Adrian for his Volt. He did a wonderful job mounting the parts...

Thanks, I would be happy to build up your modified EVSE but I have no use for your old unit. By the way, I forgot that I would reuse the GFCI coil so that adds another $15 to fixing up the old unit. I could make it a resalable for you like fooljoe's as a 240V unit only. Yes the relay is sold...

Mike if you REALLY REALLY want to change then if you order the parts I will do the work for you. You need an OpenEVSE Plus ver 2 $135 at the OpenEVSE store. A Qianji JQX-62F-2C relay from Amazon $25. A junction box $14 at Home Depot. I would take your existing front panel and use the new box...

At this time I have a spare ver 4.21 board, An outdoor 16A EVSE using the cable you rejected and nothing else. I want the EVSE board as a spare "just in case". I have no current plans to build another unit. Certainly not with another surface mount EVSE board since they cost to much. I just...

Well, I build with what I have on hand since it is a hobby for me. I tend to favor Barbouri's Ver 4.2 board since I like its output circuit. The down side is that it requires a separate 12V supply. I could not fit all of that inside the box and still make it neat with the high power relay. It...

The EVSE is sold. Thanks for letting me post here. Maybe some day the numbers will work and I will have a RAV4 EV. I will not have a hydrogen car!

Thanks, It is listed on MNL if you can get through. They are under a DOS attack. Here is a single photo of it on 120VAC

Fooljoe, I just finished an enhanced version of the charger I sold you. It has MOV transient protection, Voltage and current metering, a 12V 80A relay, and a GE 40A range cord with a molded 14-50 plug. If you know anyone looking I will sell it for $375. It requires a J1772 cable. It can take up...